Skip to content

Orbit® Принадлежности, источники питания

Digital Measurement  Network Power Supplies
Orbit Power Supplies
  • AC Power In, 5 VDC Out
  • DC Power (24 VDC) In, 5 VDC Out
  • Power up to 32 Modules depending on type

     

  • Solartron supply quality regulated power supplies for the Orbit® Measurement System in a number of configurations. We highly recommend the use of these to ensure optimum performance.
    If you cannot find the product you need please contact your local sales office or distributor.
    Orbit® Power Supplies

    Orbit Accessories
    Orbit Accessories
  • Replacement Gaiters    
  • Imperial Adapter Sleeves    
  • Clamping Collets    
  • Right angle adapters    

     

  • Replacement Gaiters: Gaiters can be replaced when damaged. Only pneumatic push probes require gaiter rings Retrofit.
    Right Angle Adaptor: For use with spring push gauging probes
    Imperial Adaptor Sleeves: Adapter Sleeves can be used to increase the body diameter of 8mm sensors to 9.512 (3/8”). Available in lengths from 12 to 127 mm. Available with or without a split.
    Clamping Collet: For use with all 8 mm diameter probes. The clamping collet distributes the clamping forces evenly around the probe body. Using the supplied grub screw, the probe can be loosened while holding the collet in place

    If you cannot find the displacement senor you need please contact your local sales office or distributor.

    Orbit® Accessories